Magnum “2505” Water Pump Cooled, Large O-evap (10.7 x 15 x 5.5), Evap. Door, 7 cu.ft. fridge or 2.3 cu. ft. freezer

Description

Magnum “2505” Water Pump Cooled, Large O-evap (10.7 x 15 x 5.5), Evap. Door, 7 . fridge or 2.3 cu. ft. freezer

Magnum “2505” Water Pump Cooled, Large O-evap (10.7 x 15 x 5.5), Evap. Door, 7 . fridge or 2.3 cu. ft. freezer

Evaporator: Large “O”
Max. Box Volume Fridge: 7 Cu. ft.
Max. Box Volume Freezer: 2.3 Cu. ft.

The Isotherm Magnum measured refrigeration framework is cooled straight by the encompassing seawater and is intended for vessels where refrigeration prerequisites are uncommonly enormous, or for expanded cruising in tropical waters. Seawater frameworks are unrivaled for effectiveness, offering expanded cooling limit that is free of the air temperature inside the boat.
The Magnum uses an essential seawater siphon to course the cooling water through the blower. The siphon hushes up, self-preparing, and can be dried up without harm.

The Magnum framework is intended for basic establishment in existing top or side-stacked fridge boxes. It utilizes a Secop (fromerly Danfoss) blower to cool an evaporator fitted in your fridge or profound cooler box.
Three styles of evaporator are utilized. O-molded evaporators can act as a cooler compartment yet require somewhat more space, Flat and L-formed evaporators can be adapted to fit.
The evaporator can be fitted in any position, and requires an establishment opening of just 1-3/16″ in the cooler divider.

The temperature is changed by an indoor regulator which likewise has an ON-OFF switch. These units are fit for giving temperatures down to 7°F, however any cooler compartment ought to be no bigger than around 50% of the evaluated volume.

• Evaporator: O-shaped, L-shaped, or Flat
• All units come as complete pre-charged “do-it-yourself” kits
• Sea water cooling for significantly higher efficiency than comparable air cooled units (in the tropics, 30 to 50% energy savings is typical)
• Lower power consumption (amperage shown is with unit filled to one half capacity)
• Heat removed by water means less heat inside the boat
• No extra holes in hull; 1/2″ water ports connect to any appropriate existing thru-hull
• Weight for all systems is 26 lb
• Dimensions for all compressors: 15.38″L x 7.88″W x 6.88″H