Magnum “2512” Water Pump Cooled, Large flat-evap (7.5 x 47.5), 7 cu.ft. fridge or 2.3 cu.ft. freezer

Description

Magnum “2512” Water Pump Cooled, Large flat-evap (7.5 x 47.5), 7 . fridge or 2.3 . freezer

Magnum “2512” Water Pump Cooled, Large flat-evap (7.5 x 47.5), 7 . fridge or 2.3 . freezer

Evaporator: Flat
Max. Box Volume Fridge: 7 Cu. ft.
Max. Box Volume Freezer: 2.3 Cu. ft.

The Isotherm Magnum secluded refrigeration framework is cooled straight by the encompassing seawater and is intended for vessels where refrigeration prerequisites are especially huge, or for broadened cruising in tropical waters. Seawater frameworks are unparalleled for effectiveness, offering expanded cooling limit that is autonomous of the air temperature inside the boat.
The Magnum uses an indispensable seawater siphon to course the cooling water through the blower. The siphon hushes up, self-preparing, and can be dried up without harm.

The Magnum framework is intended for straightforward establishment in existing top or side-stacked fridge boxes. It utilizes a Secop (fromerly Danfoss) blower to cool an evaporator fitted in your cooler or profound cooler box. Three styles of evaporator are utilized. O-molded evaporators can act as a cooler compartment however require somewhat more space, Flat and L-formed evaporators can be twisted to fit. The evaporator can be fitted in any position, and requires an establishment opening of just 1-3/16″ in the cooler divider.

The temperature is changed by an indoor regulator which additionally has an ON-OFF switch. These units are fit for giving temperatures down to 7°F, however any cooler compartment ought to be no bigger than a portion of the appraised volume.

• Evaporator: O-shaped, L-shaped, or Flat
• All units come as complete pre-charged “do-it-yourself” kits
• Sea water cooling for significantly higher efficiency than comparable air cooled units (in the tropics, 30 to 50% energy savings is typical)
• Lower power consumption (amperage shown is with unit filled to one half capacity)
• Heat removed by water means less heat inside the boat
• No extra holes in hull; 1/2″ water ports connect to any appropriate existing thru-hull
• Weight for all systems is 26 lb
• Dimensions for all compressors: 15.38″L x 7.88″W x 6.88″H